Kenocox Disinfectant is a broad spectrum disinfectant that is highly effective against endoparasites, such as cryptosporidium, parvum and coccidiosis, and bacterial infections. Kenocox Disinfectant can be applied to all surfaces and will greatly reduce infections in animal houses. Kenocox Disinfectant is manufactured without using phenol, which not only makes the product safer for farmer and animals but also reduces the impact on the environment.
How to use Kenocox Disinfectant
Kenocox Disinfectant has been tested and proven to kill 100% coccidiosis at a dilution rate of 4% (1 to 25) for a contact time of 2 hours and 100% cryptosporidium at a dilution rate of 2% (1 to 50) for a contact time of 2 hours. When used properly Kenocox Disinfectant will effectively kill all endoparasites and bacteria in the shed or house being cleaned.
Step 1) The area being cleaned must be completely cleaned of organic matter. making sure to remove dried in dung and straw and to make sure to pay particular attention to corners and angles between walls, ceilings and floors.
Step 2) Allow the area to dry thoroughly
Step 4) Dilute the Kenocox Disinfectant at the desired rate (use the table below for guidance) and spray on all surfaces that come into contact with animals. Make sure to cover all surface areas with 400ml per metre squared.
Step 5) Allow minimum contact time of 2 hours
| Target Parasite | Dilution Rate | Frequency of Application | Contact Time | Coverage Needed Per M² | Coverage Per Bottle |
| Coccidiosis | 4% (1 to 25) | At cleaning time and between Calving | 2 Hours | 400ml | 625M² |
| Cryptosporidium | 2% (1 to 50) | At cleaning time and between Calving | 2 Hours | 400ml | 1250M² |
Features of Kenocox Disinfectant
- Broad spectrum disinfectant
- Highly effective against endoparasites and bacterial infections
- Safer to use than most disinfectants
